How to connect ZVS driver to flyback transformer correctly

Thread Starter

LimoCitron

Joined Apr 15, 2021
1
Hey,
I ordered a ZVS driver + flyback transformer from Aliexpress and I'm trying to get it run.
I made a coil on the flyback transformer with 5 windings on each side. The center tap is connected to COM and the other ends of the coil are connected to the OUTs. The ZVS driver input is limited by my power supply to 10A, but the voltage dropped from 12V set to 0.5V running.
Can you help me?
 

Attachments

Top