I'm new to the digital scope world. I've attached a photo showing a trace obtained on a tektronic tds520.
200mv range from the onboarding squarewave generator 1.1 probe
1st photo is full bandwidth 2nd is 20mhz
Is this an acceptable amount of noise on the squarewave?
200mv range from the onboarding squarewave generator 1.1 probe
1st photo is full bandwidth 2nd is 20mhz
Is this an acceptable amount of noise on the squarewave?
Attachments
-
828.9 KB Views: 29
-
800.6 KB Views: 26