MaxHeadRoom
- Joined Jul 18, 2013
- 28,686
Where are you located?
There is Digikey that should have them or equivalents.
Max.
There is Digikey that should have them or equivalents.
Max.
Max,Where are you located?
There is Digikey that should have them or equivalents.
Max.
Max,Where are you located?
There is Digikey that should have them or equivalents.
Max.
Hi MaxThe top ones just look like an ordinary bridge, D13-D14 are likely candidates also D6 would be also.
Max.
Here is what I got.You are better off going to the DigiKey site and do the search, there is a link that comes up for each item. except the U15A60 what device is it,?
All the rest comes up and will give you the correct part number.
IRFP250-ND
IN5819-E3/54
S6025L
PC3SD11
Seems the Rep was just being awkward!
mAX.
Hi MaxHere is what I got.
1) IN5819 Schottky
2) IRFP260N FET Switch
3) F30U60ST Kickback Diode
IRFP250PBF Vishay MOSFET US HTS:8541290095 ECCN:EAR99 COO:CN | 2 | 2 | |
2 | 4 | 4 | |
3 | 2 | 2 | |
4 | 2 |
The Vishay is a straight replacement for the U15A60. Thanks!!Hi Max
Thanks for getting back to me. I think u were right about the awkward response from digikey. Being a newbie, I found Mouser Electronics. There I spoke to Andrea and she put a technician on the line for some technical info as well. Their service was excellent. Here are the parts I ordered (with spares)
IRFP250PBF
Vishay MOSFET
US HTS:8541290095 ECCN:EAR99 COO:CN 2 2 2
2
4 4 3
2
2 2 4
2
2
If u can't fix it...send it my way.
Hello R!f@@, I stumbled onto this old post from a long time ago. I have a Circuit board from a Treadmill that got hit with a power surge. Are you still in the business of repairing electronic circuit boards?If u can't fix it...send it my way.
Hello Max, I am not sure what version is that. I have a Horizon CST 4.5 if this helps.I have fixed a few MC2100 versions.
You have to send it a long way. Depending on ur location, you might have to sent half way across the worldHello R!f@@, I stumbled onto this old post from a long time ago. I have a Circuit board from a Treadmill that got hit with a power surge. Are you still in the business of repairing electronic circuit boards?
by Jake Hertz
by Jake Hertz
by Jake Hertz
by Robert Keim