I'm sorry to ask about this. I've read, googled, read and searched some more, but finding the bit of information that unlocks for me what I'm missing to get my head around inductors is like finding a needle in a haystack. I'm sure it's been discussed thousands of times.
Let me start with what I'm trying to do... almost everyone is familiar with having scavanged transformers on hand without identifying marks. I've found one I want to use for a project with the right wind ratio, but I don't know how much power it can be expected to deliver. I've read the blog by Jim Lux, if anyone knows it.
Anyway. I have one of those little testers for identifying caps, inductors, diodes, transistors, etc and from it am able to measure the inductance of my transformer. Given that, I'm able to calculate reactance. Is the power a transformer can deliver as simple as measuring the L of the secondary and calculating the P=V^2/w? Does the resistance of the windings play a role or is it reflected in the reactance?
If I'm just hooking up a voltage regulator to the secondary windings, does the phase angle have any significance? Not sure what I'm supposed to do with this information.
If I can simply calculate P=V^2/w, (secondary) and confirm that the wire size and insulation is sufficient for the load, then a similar procedure on the primary side would be all the analysis remaining to confirm the power handling ability of the transformer?
Oh, one more thing... just to confirm... if I measure the current in an inductive circuit, I'm measuring the RMS value? Only shifted to the phase angle indicated by the Impedance (in an RL circuit)?
Let me start with what I'm trying to do... almost everyone is familiar with having scavanged transformers on hand without identifying marks. I've found one I want to use for a project with the right wind ratio, but I don't know how much power it can be expected to deliver. I've read the blog by Jim Lux, if anyone knows it.
Anyway. I have one of those little testers for identifying caps, inductors, diodes, transistors, etc and from it am able to measure the inductance of my transformer. Given that, I'm able to calculate reactance. Is the power a transformer can deliver as simple as measuring the L of the secondary and calculating the P=V^2/w? Does the resistance of the windings play a role or is it reflected in the reactance?
If I'm just hooking up a voltage regulator to the secondary windings, does the phase angle have any significance? Not sure what I'm supposed to do with this information.
If I can simply calculate P=V^2/w, (secondary) and confirm that the wire size and insulation is sufficient for the load, then a similar procedure on the primary side would be all the analysis remaining to confirm the power handling ability of the transformer?
Oh, one more thing... just to confirm... if I measure the current in an inductive circuit, I'm measuring the RMS value? Only shifted to the phase angle indicated by the Impedance (in an RL circuit)?