An HDMI splitter I have has stopped working. All the indicator LED's on the unit work as they should but there is no output.
Opening up the casing and inspecting the PCB reveals 4 contacts labelled 'VCC', 'REST', 'SWIW' and one that's unlabelled which I've confirmed is ground. Googling pictures of similar PCB's shows ones that have pins soldered in place so they can be jumped.
So my question is probably a simple one; which 2 of the pins must I short to reset the unit, 'REST' and ?....VCC or GND
Opening up the casing and inspecting the PCB reveals 4 contacts labelled 'VCC', 'REST', 'SWIW' and one that's unlabelled which I've confirmed is ground. Googling pictures of similar PCB's shows ones that have pins soldered in place so they can be jumped.
So my question is probably a simple one; which 2 of the pins must I short to reset the unit, 'REST' and ?....VCC or GND
Attachments
-
358.1 KB Views: 7