Purpose :
your task will be to design an amplifier and low pass filter (LPF) circuit
Problem statement :
you were tasked to design the amplifier and filter circuit for the radio sets.... benchmarking will be done with this specifications :
Specification
Input waveform : 1v peak to peak sine wave
LPF cutoff frequency : 2khz
Input frequency : 100hz : 1khz : 2khz : 20khz : 200khz
output amplitude : 10 vp-p : <10 vp-p :5vp-p : <=1 vp-p : <=0.1vp-p
tips :
is is suggested that you use a comjbination passive filter and BJYT amplifier (inverting ) circuit
_________________________________________________________
i dont have any guide to solve this project + with my knowledge of electronic ~~!!! so aWesome,just start to learn
if you all have any suggestion or diagram plss post and help me ....
thanks
your task will be to design an amplifier and low pass filter (LPF) circuit
Problem statement :
you were tasked to design the amplifier and filter circuit for the radio sets.... benchmarking will be done with this specifications :
Specification
Input waveform : 1v peak to peak sine wave
LPF cutoff frequency : 2khz
Input frequency : 100hz : 1khz : 2khz : 20khz : 200khz
output amplitude : 10 vp-p : <10 vp-p :5vp-p : <=1 vp-p : <=0.1vp-p
tips :
is is suggested that you use a comjbination passive filter and BJYT amplifier (inverting ) circuit
_________________________________________________________
i dont have any guide to solve this project + with my knowledge of electronic ~~!!! so aWesome,just start to learn
if you all have any suggestion or diagram plss post and help me ....
thanks