You know that there are several free tools for drawing a schema? I's suggest you use one.

Eagle
Diptrace
ExpressPCB

... and there are more, just take your pick!

With Express PCB being the easist to learn to use. Five minutes using it and you will be producing schematics.

Diptrace also easy to use not as easy as Express PCB but much more powerful.

Eagle is really hard to learn but supposed to be very powerful.



What you provided really isn't a proper schematic. These tools will help you with that,

 

ok....................

 

ok....................

Better than before but...

Don't you have a scanner? This looks like a photo.

Take a few minutes and learn express pcb or diptrace. You will thank yourself later.

 

Take a few minutes and learn express pcb or diptrace.

I have downloaded them before but can't find, please let begin with work.

 

This is to get started.

I've made it in Eagle 6.2.0

Prior to start programming, you need to tell where nets 1-9 is connected. We do know that it is connected to the uC, but to which port?

 

We do know that it is connected to the uC, but to which port?

till now nothing is connected to uC

 

WE can't tell what would be the most convenient way to connect the LED array to the microcontroller.

However, I'll suggest that it would be best if you used a single 8-bit port that won't be needed for any other function.

 

However, I'll suggest that it would be best if you used a single 8-bit port that won't be needed for any other function.

OK,we should begin...

 

OK,we should begin...

You start, and we follow. If you get stuck, the forum will help.