Facebook
Google
GitHub
Linkedin
Hi
I'm doing project in which i need to create a wireless link between a board and an LED display. I'm using RF modules for the wireless communication which i have already bought.
I sort of understand how they work, however i can't figure out what certain pins on the receiver and transmitter do, or whether or not I'm gonna be needing them.
I have attached the data sheets for the components, can anyone tell me what the functions of these pins are:
Transmitter - Pin 13 - FSK Data Input
Receiver - Pin 1 - FIFO fill interrupt (Active Low) / status read data output
Pin 3 - FSK Data Output (non FIFO Mode) / FIFO Select
Pin 4 - Clock Output (noFIFO) / External filter Capacitor(analog mode) / FIFO interrupt (active High) when FIFO level set to 1, FIFO Empty interruption can be achieved.
Thank you very much
I'm doing project in which i need to create a wireless link between a board and an LED display. I'm using RF modules for the wireless communication which i have already bought.
I sort of understand how they work, however i can't figure out what certain pins on the receiver and transmitter do, or whether or not I'm gonna be needing them.
I have attached the data sheets for the components, can anyone tell me what the functions of these pins are:
Transmitter - Pin 13 - FSK Data Input
Receiver - Pin 1 - FIFO fill interrupt (Active Low) / status read data output
Pin 3 - FSK Data Output (non FIFO Mode) / FIFO Select
Pin 4 - Clock Output (noFIFO) / External filter Capacitor(analog mode) / FIFO interrupt (active High) when FIFO level set to 1, FIFO Empty interruption can be achieved.
Thank you very much
