Several scientific medical studies have indicated that the heart rhythm condition AFIB can be triggered by emf waves preceding low pressure weather fronts. One study postulates the frequency range is 3 to 5 khz but could be up to 10 MHZ. I have that medical condition, and I know that I am seriously effected by these wx fronts even though I have had physics professionals tell me that they don't exist. What I am trying to do is use a frequency sweep generator output and amplify that output into an antenna so that I can experiment as to what frequency range tends to effect my heart rhythms, so that I can proceed in actual wx front emf wave detection. My questions are... 1. Will the sine wave voltage output of the sweep frequency generator contain the emf component that I am trying to simulate? 2. Can you link me to schematics for transmitters in this frequency range... 1khz +? 3. Does anyone know anything about emf waves generated from low pressure or cold wx fronts. I can feel these waves in my chest as the front approaches, and then feel their
absence once it passes. The emf waves can lead the front by as much as 48 hours, since they travel at radio frequencies. I am an old TTL digital technician and ham radio operator since the 60's. I need help with modern electronic devices. I am having trouble understanding how the emf wave and the ac sine wave of a transmission work together and what is needed to transmit the emf component. Thank you.
absence once it passes. The emf waves can lead the front by as much as 48 hours, since they travel at radio frequencies. I am an old TTL digital technician and ham radio operator since the 60's. I need help with modern electronic devices. I am having trouble understanding how the emf wave and the ac sine wave of a transmission work together and what is needed to transmit the emf component. Thank you.
Last edited: