I am working on a project using various DC motors and having trouble figuring out a circuit that is confusing to me and probably very simple to members.
I am trying to keep this inexpensive and currently using a wiper motor. I have looked into Arduino and delay relay modules and have learned much about Dynamic breaking and reversing.
My question is, I need a circuited that can be controlled by a low or high signal from a programed relay controller to start the motor then stop at 90 deg with brake, then delay for a second before returning home with dynamic brake.
Any suggestions would be very much appreciated.
I am trying to keep this inexpensive and currently using a wiper motor. I have looked into Arduino and delay relay modules and have learned much about Dynamic breaking and reversing.
My question is, I need a circuited that can be controlled by a low or high signal from a programed relay controller to start the motor then stop at 90 deg with brake, then delay for a second before returning home with dynamic brake.
Any suggestions would be very much appreciated.