according to table 7.1 if there is 0v to input LED then output to device gate is 0v also? https://www.mouser.com/datasheet/2/408/TLP5754_datasheet_en_20181004-708579.pdf
gate driver output
- Thread starter pager48
- Start date
Daniel Sala
- Joined May 28, 2015
- 65
Hi,
If by "device gate" you mean M1/M2, it seems it might be "0V", but table 7 states that M2 is on when the LED input is low. If you mean the output of the IC, table 10 says low level (I'm interpreting sinking) output voltage is 70mV to 200mV.
If by "device gate" you mean M1/M2, it seems it might be "0V", but table 7 states that M2 is on when the LED input is low. If you mean the output of the IC, table 10 says low level (I'm interpreting sinking) output voltage is 70mV to 200mV.
