Another question.. sorry guys.
I've purchased a 24v 6a LED power supply - I'm hoping to use it for testing some 24v 36W electromagnetic coils in safety brakes.
I'm going to use a 1N4007 as the flyback diode but wondered if it was ok to be at the supply output terminals or does it need to be as near to the coil as possible?
I've purchased a 24v 6a LED power supply - I'm hoping to use it for testing some 24v 36W electromagnetic coils in safety brakes.
I'm going to use a 1N4007 as the flyback diode but wondered if it was ok to be at the supply output terminals or does it need to be as near to the coil as possible?