Hey guys
My teacher taught us how to use flip flops as a binary password controller.
The main idea is, if the binary word is inserted correctly, the FF system gives a High logic signal at its output, otherwise, the output is Low.
Anyway I tried to build the circuit for a specific word in Multisim, but i just can't get it to work.
I was told that each bit in the word should be inserted when the CLK is at high edge, and so I used switches as shown in the link below.
This specific system is supposed to do the following: "Output = 1" if "input code is 10", else, "Output =0"
http://i54.tinypic.com/2q1x9x1.jpg
My teacher taught us how to use flip flops as a binary password controller.
The main idea is, if the binary word is inserted correctly, the FF system gives a High logic signal at its output, otherwise, the output is Low.
Anyway I tried to build the circuit for a specific word in Multisim, but i just can't get it to work.
I was told that each bit in the word should be inserted when the CLK is at high edge, and so I used switches as shown in the link below.
This specific system is supposed to do the following: "Output = 1" if "input code is 10", else, "Output =0"
http://i54.tinypic.com/2q1x9x1.jpg