Hello everyone, I believe I have a simple question. I’m building a stereo from the basic components, power supply, dsp amplifier boards, preamplifier board, ect. I ordered a Cheval electronic enclosure that came with two mounting rails but I need at least three, I think. My power supplys board is 4.92” x 2.56” and I have the two included rails set apart at 4.92. The amplifier boards are 3.6"L x 2.7"W and both will be stacked with standoffs. Any help to obtain another rail or two? I thought about using something like a thin hdpe sheet but I think using rails is the most legit mounting tactic. I’m open to any suggestions I might not be aware of.
DIY Electronic Enclosure Box Case 2U 87 x 178 x 203 mm. Full Aluminum Blue https://a.co/d/chricCS
DIY Electronic Enclosure Box Case 2U 87 x 178 x 203 mm. Full Aluminum Blue https://a.co/d/chricCS