All About Circuits

Filter Design

R

Thread Starter

roxetz

Joined Mar 6, 2006
5
I need to deisgn a filter that recovers a 40kHz signal in a very noisy system. I think I would need to implement a bandpass filter for this, with passband omega_o = 80pi rad/s. However, I think I need more information to find out the circuit elements/bandwidth/quality factor/cutoff frequencies. Any ideas would be greatly appreciated. ASAP PLEASE! Thanks.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
gmj1987 EMI Filter Design Power Electronics 1
kalemaxon89 Active low-pass Sallen-Key Butterworth filter design Analog & Mixed-Signal Design 20
Raj_Singh Sinc Filter Design for sigma delta ADC Analog & Mixed-Signal Design 10
The_Logician Capacitor for filter design. Analog & Mixed-Signal Design 4
JohnSnow16041992 Should HPF be higher than expected frequency range and LPF lower? Sensor Design & Implementation 21
Similar threads
EMI Filter Design
Active low-pass Sallen-Key Butterworth filter design
Sinc Filter Design for sigma delta ADC
Capacitor for filter design.
Should HPF be higher than expected frequency range and LPF lower?

You May Also Like

Top