I want to use a very fast Spdt Rf switch Masw20000 and want to control it through Fpga.it has two control signal inputs A and B. The control signals required for this switch are 0V and -5V for switching of one state and -5v and 0v for switching to other state.
The problem is that i cannot provide -5v from fpga.
One solution is to use an inverter but its responce is slow.
I want to genarate control signals 0v and -5v within 1ns.
If Any idea or solution
The problem is that i cannot provide -5v from fpga.
One solution is to use an inverter but its responce is slow.
I want to genarate control signals 0v and -5v within 1ns.
If Any idea or solution
Attachments
-
510.6 KB Views: 1