Electronics Proyect

Thread Starter

iqjavier

Joined Feb 22, 2005
1
Greetings!

Our professor gave us an assignment but failed to explain how to do it correctly. I have search online for a while and cannot seem to get good information. I need to bias a BJT used in the CE configuration. Only specs are that peak power output = 0.5W, Rload = 8 ohm and Fh = 20kHz and Fl = 20 Hz. That's it basically there are 4 capacitors. Cc, Ce, Cb, and a C between base and collector. Please help me go on the right direction atleast.

Sincerely,
Javier Malavé
 

dragan733

Joined Dec 12, 2004
152
Originally posted by iqjavier@Feb 23 2005, 12:49 AM
Greetings!

Our professor gave us an assignment but failed to explain how to do it correctly. I have search online for a while and cannot seem to get good information. I need to bias a BJT used in the CE configuration. Only specs are that peak power output = 0.5W, Rload = 8 ohm and Fh = 20kHz and Fl = 20 Hz. That's it basically there are 4 capacitors. Cc, Ce, Cb, and a C between base and collector. Please help me go on the right direction atleast.

Sincerely,
Javier Malavé
[post=5529]Quoted post[/post]​
In the attachment is the solution
Regards
 
Top