Hello good people,
I bought a car ambient light neon strip.
It works with an adapter which transforms DC voltage to about 100V AC.
When I test it on my adapter it works just fine, it shines perfectly at 6V and 12V.
The problem is when I connect it to the windows up/down light at the cars door (where it needs to be connected).
The voltage there is from 3V to 9V (depending how bright you set the ambient light in the car).
After connecting, the neon strip and the windows up/down light start to flash.
I don't know what it could be, I tested it with 4 adapters and 4 light strips, everytime the same, have you an idea?
Greetings.
I bought a car ambient light neon strip.
It works with an adapter which transforms DC voltage to about 100V AC.
When I test it on my adapter it works just fine, it shines perfectly at 6V and 12V.
The problem is when I connect it to the windows up/down light at the cars door (where it needs to be connected).
The voltage there is from 3V to 9V (depending how bright you set the ambient light in the car).
After connecting, the neon strip and the windows up/down light start to flash.
I don't know what it could be, I tested it with 4 adapters and 4 light strips, everytime the same, have you an idea?
Greetings.
Attachments
-
1.2 MB Views: 14
-
555.6 KB Views: 12
-
524.6 KB Views: 13