What does the diode symbol with the line running through it mean?
Do not use 1N4007. It was designed for 50/60hz and is too high voltage. Generally high voltage diodes have high forward voltage drop.what type of diode should I use?.... 100kHz ......5V
Yes.You can also use the B-C junction of 2n2222 or similar BJT's
When transistor radios first came out, the manufacturers would say how many transistors they had, implying that the more transistors, the better the radio.You can also use the B-C junction of 2n2222 or similar BJT's
The valve radio manufacturers did much the same with EB41 et.al.When transistor radios first came out, the manufacturers would say how many transistors they had, implying that the more transistors, the better the radio.
Some would then use a transistor for the AM diode detector, so they could say they had one more transistor then the competition.
No.Collector and Base Shorted
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
J | Diodes and Voltage Measurements | General Electronics Chat | 31 | |
J | Common Diodes | General Electronics Chat | 7 | |
G | Purposes of these diodes in a circuit | General Electronics Chat | 47 | |
M | Two series diodes in amplifier | Analog & Mixed-Signal Design | 8 | |
V | Center-tapped fullwave rectification without diodes? | Analog & Mixed-Signal Design | 12 |
by Jake Hertz
by Duane Benson
by Jake Hertz
by Aaron Carman