Current Not Working on DMM

Thread Starter

ElectronicsFanatic

Joined Feb 12, 2012
30
I have a picture to show the circuit on my breadboard. I can't seem to get a reading as to the current for the circuit. Do I have it set up right to get the current reading from the DMM. I know it will be a little hard to see in the picture, but I do have all the wires in the right holes and I have checked to make sure that I still have power going through the circuit. Let me know what you guys think. I think I might have blown a fuse in the DMM.

 

Thread Starter

ElectronicsFanatic

Joined Feb 12, 2012
30
sorry for the slow reply, I have been at work. I set up the circuit again and tried to see if it was because I had it set to ac instead of dc. It still didn't work. I forgot that I had another cheap DMM. So i hooked that up and I was able to get a measure.



I also checked the fuse like KJ6EAD suggested and it is saying that the fuse is blown. Thanks for the help!!
 
Top