Alright! I followed Mark's article and I have all of my parts. I am going to convert my wheelchair base into RC so that I have an RC camera base. From reading his article I don't think I need to use the Arduino. I just need it to go and stop when I use my Flysky controller. This is new to me. Never messed with the Sabertooth controllers but it seems pretty straight forward.
I will include pics of my starting stuff.
My plan is to take the front tip wheels off and make a bar with some smaller tip wheels and this bar will slide into the foot rest mount. I will make a steel plate (to bolt down to the seat mount) with a 12" steel pipe welded to the base plate for my 3'-6' extension pole to slide down into (firm fit). I will probably mount the pole aft of center center by 6" or so to help keep it from tipping forward. If it still has a tendency to tip forward then I will add a weight bar across the back drag wheels.
I will include pics of my starting stuff.
My plan is to take the front tip wheels off and make a bar with some smaller tip wheels and this bar will slide into the foot rest mount. I will make a steel plate (to bolt down to the seat mount) with a 12" steel pipe welded to the base plate for my 3'-6' extension pole to slide down into (firm fit). I will probably mount the pole aft of center center by 6" or so to help keep it from tipping forward. If it still has a tendency to tip forward then I will add a weight bar across the back drag wheels.