Hello All. This is my first post here and i'm sorry if i'm posting in the wrong section but i am wondering if anyone is able to help.
My end goal is for the PCB to convert 3.7 DC into 100 AC. the input will be using a 1500 Mah LI-PO battery and the output will be to power EL wire. with three settings. On / Off / Pulse.
ill be using 4 meters of EL wire. but i think something has been very lost in translation because they said the 4 meters will be 1040 watt. surely this is wrong??
My basic knowledge of design only got me so far before i asked a friend to help (who then asked another friend.) iv been sent this diagram and quite frankly im not sure what im looking at or even if this is the best solution. size of the PCB is important because it needs to be portable.
If anyone could offer any help or advice id be really grateful.
Thanks
Dan.
My end goal is for the PCB to convert 3.7 DC into 100 AC. the input will be using a 1500 Mah LI-PO battery and the output will be to power EL wire. with three settings. On / Off / Pulse.
ill be using 4 meters of EL wire. but i think something has been very lost in translation because they said the 4 meters will be 1040 watt. surely this is wrong??
My basic knowledge of design only got me so far before i asked a friend to help (who then asked another friend.) iv been sent this diagram and quite frankly im not sure what im looking at or even if this is the best solution. size of the PCB is important because it needs to be portable.
If anyone could offer any help or advice id be really grateful.
Thanks
Dan.
Attachments
-
156.5 KB Views: 21