I have three inputs A B C and there is one case where A=0 B=0 C=1 gives me output 1 and I want it to be 0, I don't want to use any extra logic gates other than one NAND and one NOT gate, also I don't want the output to be 1 when A=0 B=1 C=0. I have thought about using transistors and comparators but they can't satisfy both these conditions.
I just don't know how to tell the circuit to "Output is 0 when A and B are both zero or when only B is 1" without using logic gates... is there actually any ways to this ?
I just don't know how to tell the circuit to "Output is 0 when A and B are both zero or when only B is 1" without using logic gates... is there actually any ways to this ?