Hi everyone, would anyone be able to tell me what is the type/model of this connector.

It is used in a QSC speaker K10 and the part number is WC-000426-00.

thank you !

 

Welcome to AAC!

This is from QSC. Appears to be the same connector with a different part number:

https://parts.qsc.com/co-000426-00

You have to create an account to get more info. I'm not inclined to do that.

 

Thanks for your reply.

I saw this on the QSC website however I am trying to find the reference to see if I can buy it on Mouser or Digikey.

 

I am trying to find the reference to see if I can buy it on Mouser or Digikey

What is the pin spacing? What does the mating connector look like?

 

Here is a better picture from the same QSC site. The part number is QSC in-house stock number and is irrelevant to the manufacturer's part number.
I have looked everywhere with no luck.
It would appear that it is a locking connector. You push on the side of the connector to lock the wires.



Here is a QSC WP-218102 amplifier board that uses that connector.




My assumption is that the picture shown above is actually showing two boards from a QSC powered speaker.
The ribbon cable connects the preamp board to the main amp and power supply board.

 

Many thanks to all of you. I will order from the QSC website then...