I have this trail camera, it was accidentally connected to 12v and it is only good for 6v, as you can see in the photo two components are damaged the centre one of the three is not damaged, my problem is I can’t identify the damaged parts, if any one can help me it would be greatly appreciated.

 

Hi,
Look for information on U6, then replace U4 & U5.
Other components could be damaged.
Good luck.............

 

Hi,
Look for information on U6, then replace U4 & U5.
Other components could be damaged.
Good luck.............

Thanks for your response, I have already tried to get identy from u6, I was hoping someone on here might be able to tell me what u6 actually is

 

Hi,
I've done some searching. Not found anything yet.
http://ftp.turuta.md/demobook/SMD-CODES-DATABOOK-2023-SAMPLE.pdf
Good luck............