Thanks again you all! I now ordered these two from Amazon. I didn't find manuals for them, but hope that one of them can do a short trigger and then an off delay timer. If not, I thought that I can use one for the short trigger, and then the other one for the delay. Does that make any sense?

https://www.amazon.de/-/en/gp/product/B019XK1NR6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
https://www.amazon.de/-/en/gp/product/B07DFZYK2K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

 

It may work, but you won't know until you get them.
If you need to use both, then you could wire the input to the 1s pulse module through a NC contact of the 15s module with the 15s module triggered by the output from the 1s module.

 

You don't really expect me to click on the link again.

I guess that's a reasonable response. Will remove the links and instead post screen shots.

[edit] link removed. [end edit]

 

It may work, but you won't know until you get them.
If you need to use both, then you could wire the input to the 1s pulse module through a NC contact of the 15s module with the 15s module triggered by the output from the 1s module.

That sounds good, thanks!

 

Hi again, I managed to do this with the two timers I ordered. I simply switched the power supply of the respectively other timer through the relay. A sketch and a short video is attached. Thanks again for your help!

geb

https://gebseng.com/download/Zeitschalter.mp4