Hi everyone,
I have a question concerning circuit breakers.
Here is my scenario.
I have a control unit that has a 230V supply running into it and I need some kind of overload trip device.
The 230V supply is being fed to a pump that will pull around 1.2A and a band heater that pulls around 5A.
I need devices that will trip if too much current is being pulled by either the pump or the heater.
I know I can use an Overload relay,1.10-1.60A FLC for protection against the pump, but I need something for the heater.
I have been browsing a site that is linked below that can supply cheap MCBs and RCDs but I have no clue what the difference between them are.
http://www.toolstation.com/shop/Electrical...on/d190/sd2615/
Could someone please advise me.
If my description isnt enough information please let me know and I will try and amend it.
I have also included a datasheet for the pump Overload relay,1.10-1.60A FLC I have found.
I have a question concerning circuit breakers.
Here is my scenario.
I have a control unit that has a 230V supply running into it and I need some kind of overload trip device.
The 230V supply is being fed to a pump that will pull around 1.2A and a band heater that pulls around 5A.
I need devices that will trip if too much current is being pulled by either the pump or the heater.
I know I can use an Overload relay,1.10-1.60A FLC for protection against the pump, but I need something for the heater.
I have been browsing a site that is linked below that can supply cheap MCBs and RCDs but I have no clue what the difference between them are.
http://www.toolstation.com/shop/Electrical...on/d190/sd2615/
Could someone please advise me.
If my description isnt enough information please let me know and I will try and amend it.
I have also included a datasheet for the pump Overload relay,1.10-1.60A FLC I have found.