Hi I am building a 3 channel color organ kit that powers from 120vac and have soldered everything together, however, when I hook it all up, it does not work. How can I check my work to ensure that I've done everything correctly? Is there a methodological process?
I've gone through the diagrams and re-checked all components. This is the second kit that i've made where in the end, it will not fire up. So I know that I am at fault.
There is no power coming out of the outlets to the lights.
Any tips? I have a multi-meter for testing.
Thanks
Rick
I've gone through the diagrams and re-checked all components. This is the second kit that i've made where in the end, it will not fire up. So I know that I am at fault.
There is no power coming out of the outlets to the lights.
Any tips? I have a multi-meter for testing.
Thanks
Rick