Good day guys.. The 7 segment decoder(74LS47) gets the converts binary numbers to display their decimal value on the 7 segment display(common anode in my case). My question is, when the values for 3 is decoded(a=1,b=1,c=1,d=1,e=0,f=0,g=1), HOW CAN I CONVERT THIS VALUES to read as a 5(a=1,b=0,c=1,d=1,e=0,f=1,g=1) on the 7 seg display? I have tried to implement some logic gates between the decoder and the 7 seg display but to no success. I am dealing with numbers from 1 to 7 only. All I need is for 5 to be shown on the 7 seg everytime the binary value fo 3(011) is inputed into the 7447...I am stuck and this is the last bit of my mini-project that is due tomorrow.