Very new guys.
home project to renovate NeoGeo arcade machine.

Cap is from the power board for the screen on an old NeoGeo 2slot arcade machine.
Cap has .1M on it, then the letter S in a stadium shaped boarder, 160V~y (the y is fancy looking)

I have found 1 thread that says it is could be 0.1uf +/- 20%, with the M being the tolerance.
Is it polypropylene?

I want to replace it and am unsure what to order.

This is on 100V AC power supply.

Thanks in advance

 

.1 = 0.1μF = 100nF and M = 20% tolerance.

 

Yeah It is a 0.1 uF Cap with 160 V voltage rating.

 

Thanks for the clarification, Is it polypropylene though?

 

Yes, film capacitor for sure.

 

I think it is probably polyester like these http://uk.farnell.com/webapp/wcs/st...edCategoryId=&gs=true&st=polyester 100nf 160v

 

Nice one. Thankyou guys. Cheers.