Can anyone make out the labels on this circuit analysis?



Is the symbol near USB ground?



I'm trying to adapt this board for a different RTL-SDR which gives a hole for pins 4 & 5.

The RTL-SDR dongle provided with this kit has capacitors near pins 4 & 5 and it will be a problem to solder wires to it, so I thought instead of doing that, I might adapt the board for different rtlsdr dongle which provides holes for pins 4 & 5, and instead of soldering wires on pins 4 & 5, I can solder a wire to that hole. But this different rtlsdr dongle is slightly longer and I don't what correspond to Capacitor 47 and 52 on this different dongle.

 

Circle the component in question.

 

How can I find out what capacitors would correspond to below circled ones on the different dongle?

 

hi bypass,
Are you asking what the ringed symbol is, if yes, its a 0V/Gnd symbol.

E

 

Is there a way for me to know what those other circled things are on a different dongle?

 

That is the symbol used to indicate coax shield which is grounded. Center conductor, shield jacket grounded.