Ok so i have to make buzzer 2 go off when pb 1 is pushed, and have to get buzzer 1 to go off when pb 2 is pushed. I can only use the three wires in between both sides.
I have wired it up with actual wire but don't exactly remember how i did it, and i have a feeling it will be on a test soon.

Any help would be appreciated, will post if i think i've figured it out.

 

will this do?

 

will this do?

I dont think thats it, the challenenge is you can have as many wires on either side, but only the three in the middle can bring any voltage to the opposite side. You can't have additional wires.

That would be it if you were wiring it regularly.

 

Then this is another way

 

Hello,

@ R!f@@, you are creating a fourth wire for the pushbuttons.

@ Otis, try to use some diodes.

Bertus

 

I know there isnt any diodes invloved, thanks for the help tho guys, ive been trying this repeatedly but i cant figure it out, even tho i put it together in class one day

 

I think i got it.

This would accomplish my desciption right?

 

the above has fourth wire too.

 

the above has fourth wire too.

Congratulation.

You have reached the final stage of self enlightenment, seeing a wire that is not visible by us mortal. A wire that shall we say, become loose somewhere.

Now try seeing the fifth wire.....

 

What do you say to this

 

Congratulation.

You have reached the final stage of self enlightenment, seeing a wire that is not visible by us mortal. A wire that shall we say, become loose somewhere.

Now try seeing the fifth wire.....

Hey .....hahahha
I know where the fifth is.

 

You can spilt after you have come through the three wires, there is multiple terminals and what not.