Hi everyone. I'm new to AAC and to electronics. I want to build a loop pedal that records music played into it from a guitar, then, after hitting a switch, plays it back in a continuous loop through an amplifier as someone plays over the loop through the same amplifier. I found an instructables but it used an old through hole version of the radioshack PCB that also didn't have a separate mic (as mine does). I believe I can still use that instructable with a few modifications to the instructions (one reason for this post). Otherwise, I saw a different thread that explains how to loop the module, but I'm but sure if it would be continuous (there might be pauses between loops), but either way, it doesn't explain specifically how to make it into a guitar pedal. I've considered combining the two sources, but I'm not sure how. I will post the instructables link and the thread name soon. I appreciate any help I can get.