I have connected a bridge rectifier (KBPC5010 - www.danomsk.ru/pdf/159613.pdf) to an AC source of 25v 40Amp
and a filter capacitor rated 70V 4700uF in parallel with DC output.
but the DC output when measured with a voltmeter is only 4v whereas the input AC voltage is 25v.
I cant figure it out
and a filter capacitor rated 70V 4700uF in parallel with DC output.
but the DC output when measured with a voltmeter is only 4v whereas the input AC voltage is 25v.
I cant figure it out