All About Circuits

Bridge Dragino Yun Shield WIFI connection to Ethernet

Search Forums New Posts
R

Thread Starter

Rednecklawrence

Joined Jul 15, 2015
19
Hello! What am trying to accomplish here seems to be a bit beyond my means. I want to build a wireless robot with a live video stream on it. I want to use a raspberry pi running motioneye (which i have working and can view on my local network) to be able to instead connect to the ethernet port on a Dragino Yun shield v2.4 and recieve an internet connection there. I have the shield working and controlling the robots movements via the local network over Wifi. So what i really want is a way to bridge the Wifi connection of the shield to the ethernet port of the shield, like a router of sorts, but while maintaining the use of the bridge to the arduino. Is this possible? If yes, how so? Thanks!
 
Last edited:
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
A Half Bridge SMPS using SG3525+IR2110, Output not changing with duty cycle Power Electronics 4
LeoDuong05 Design Review: 1.2kW Half-Bridge Converter - Driving IRFP260N at 100kHz using UCC21520 Power Electronics 4
Trumpeldor Industrial PCIe Gen3 (NVMe) to USB 3.2 Bridge – Part or Architecture Recommendation Digital Design 1
000G The paralell RC in line before the bridge rectifier. Homework Help 10
Z Full bridge inverter using UC22510 Not working LTspice PCB Layout , EDA & Simulations 0
Similar threads
Half Bridge SMPS using SG3525+IR2110, Output not changing with duty cycle
Design Review: 1.2kW Half-Bridge Converter - Driving IRFP260N at 100kHz using UCC21520
Industrial PCIe Gen3 (NVMe) to USB 3.2 Bridge – Part or Architecture Recommendation
The paralell RC in line before the bridge rectifier.
Full bridge inverter using UC22510 Not working LTspice

You May Also Like

Top