Bosch Power Box 360D Stereo Amp Board Fail

Thread Starter

justinmay1982

Joined Jun 18, 2017
3
I recently tore into my Power Box 360 D Bosch job site radio for a no sound issue. I found that the amp board was fried. I have not been able to find replacement parts for my Bosch job site radio. I want to add a new amp board to my stereo possibly one with blue tooth function if possible. I am having difficulty identifying what the connectors are for. I have figured out that one is for left right center and ground for sound but the others I am unsure. If someone could help me identify the components of the board so that I can purchase one that will work with my Bosch stereo I would greatly appreciate it. Here are some pictures of the Amp Board.

20170617_233943.jpg 20170618_094125.jpg 20170618_094133.jpg 20170618_094139.jpg 20170618_094145.jpg 20170618_094155.jpg
 

Dodgydave

Joined Jun 22, 2012
11,284
You need to trace where the grey ribbon cable comes from, could be the left,right inputs, psu, ground, and what else??

Plenty of Bluetooth pcb amps on ebay 15/25W with remote control.
 

Thread Starter

justinmay1982

Joined Jun 18, 2017
3
You need to trace where the grey ribbon cable comes from, could be the left,right inputs, psu, ground, and what else??

Plenty of Bluetooth pcb amps on ebay 15/25W with remote control.
First I want to say thank you for helping me I really appreciate your help. I am a complete noob when it comes to circuit boards. I did look to see where the gray cable went and there are some labels next to where it connects to the board. There are seven labels i assume for the seven pins of the gray connector. The labels are STBY5V, AMP RESET, AMP PDN, AMP MUTE, GND, AMP SDA, AMP SCL. A few of them I don't understand what they mean. I guess my next challenge is finding an amp board with those features?
 

adamdes2000

Joined Feb 22, 2024
1
I recently tore into my Power Box 360 D Bosch job site radio for a no sound issue. I found that the amp board was fried. I have not been able to find replacement parts for my Bosch job site radio. I want to add a new amp board to my stereo possibly one with blue tooth function if possible. I am having difficulty identifying what the connectors are for. I have figured out that one is for left right center and ground for sound but the others I am unsure. If someone could help me identify the components of the board so that I can purchase one that will work with my Bosch stereo I would greatly appreciate it. Here are some pictures of the Amp Board.

View attachment 129185 View attachment 129186 View attachment 129187 View attachment 129188 View attachment 129189 View attachment 129190
So I know old post but I need your help how do I spit the thing open I need to re Saulder a power button I have the sub off
 
Top