Hello all. I'm generating a 113 kHz zero-crossing sine wave at peak voltage of 5 V with a cheapo function generator. My target load is a piezoelectric mister that looks to be about 400 Ohm resistance when resonating.
I would like to boost the voltage to 50 V peak since this is the most that I'm sure the mister can take. Can anyone recommend a good method for boosting the voltage to 50 V while retaining the waveform and using only a max 24 VDC power suppy?
I would like to boost the voltage to 50 V peak since this is the most that I'm sure the mister can take. Can anyone recommend a good method for boosting the voltage to 50 V while retaining the waveform and using only a max 24 VDC power suppy?