Hi Everybody,
I know that load are usually done with Mosfet but i'm trying to do this with Bjt instead.
Load current : 10mA -> 3A
Load Voltage : 1V -> 10V
I tried this schematic but something goes wrong when I try with 1V.
With a BJT, we must have at least 0.2V from Vce. On 3A and 1 Ohm resistor, the device must provide at least 3.2V. So i don't know how to make it works.
If someone have an idea don't hesitate !
Thank you !
I know that load are usually done with Mosfet but i'm trying to do this with Bjt instead.
Load current : 10mA -> 3A
Load Voltage : 1V -> 10V
I tried this schematic but something goes wrong when I try with 1V.
With a BJT, we must have at least 0.2V from Vce. On 3A and 1 Ohm resistor, the device must provide at least 3.2V. So i don't know how to make it works.
If someone have an idea don't hesitate !
Thank you !
Attachments
-
36.4 KB Views: 47