Hi everyone, First time poster here so bare with me. Here's the story Many years ago when i was in my senior year at high school I did a work experience program at a small electronics engineering and manufacturing company. My Task With the boss was to create a 24hr Binary clock Utilizing a PIC micro-controller (18F2525) (28Pin). Now at the time i was confident with construction of simple electronics and SMD boards, However i had and still haven't got any experience with C-programing of these chips. Anyway he showed me some basics of mplab and the standalone Pickit program and did the rest for me.
Now this is about 7 years down the track and i thought i would play with it again only to find the chip is blank.
obviously every circuit configuration is programmed to different I/O's and configs. so i need help with creating the C-code for this circuit. i am using MPLAB X IDE and i have both PICKIT 2 and 3.
The pictures show the project with the red arrow highlighting the MCLR pin. And the Black box highlights the external crystal circuit.
From the Side on photo you can see the LED's are in a Grid formation.
Don't hesitate to ask for more photos or more info, I sincerely appreciate any help, Kind regards Brent.
Now this is about 7 years down the track and i thought i would play with it again only to find the chip is blank.
obviously every circuit configuration is programmed to different I/O's and configs. so i need help with creating the C-code for this circuit. i am using MPLAB X IDE and i have both PICKIT 2 and 3.
The pictures show the project with the red arrow highlighting the MCLR pin. And the Black box highlights the external crystal circuit.
From the Side on photo you can see the LED's are in a Grid formation.
Don't hesitate to ask for more photos or more info, I sincerely appreciate any help, Kind regards Brent.