Hi, I recently changed an IR sensor of a Philips air condition after it stop responding to remote control commands. Long story short I ended up getting a new circuit board and a new IR sensor(by 'new' I mean from other AC units which has been discarded) - the board and the new IR sensor was exactly identical to the one which I took out. Anyways after I connected it, the command took quite a while to register when a button is pressed on the remote.
What could be the possible cause for something like this? How can I troubleshoot it further?
Thanks in advance.
What could be the possible cause for something like this? How can I troubleshoot it further?
Thanks in advance.