Hi,
I have a problem here everyone. This is really make me going to crazy. I have an exact connection just like the connection in Figure 11.
Suppose i have a 3V input to the X1 and 3V input to the Y1. X2 and Y2 is grounded. Z is also grounded. In this case i should get a 0.9V because 3X3/10 it will be 0.9V. I am sure my there is no wrong in my connection because i had check through it many times. The answer i get from the output W is around 12.2V. What happen to my circuit actually? Is my AD633 IC spoil or broken and give me this result? Please assist me =(
You can find the AD633 Analog Multiplier Datasheet at http://www.analog.com/static/imported-files/data_sheets/AD633.pdf
I have a problem here everyone. This is really make me going to crazy. I have an exact connection just like the connection in Figure 11.
Suppose i have a 3V input to the X1 and 3V input to the Y1. X2 and Y2 is grounded. Z is also grounded. In this case i should get a 0.9V because 3X3/10 it will be 0.9V. I am sure my there is no wrong in my connection because i had check through it many times. The answer i get from the output W is around 12.2V. What happen to my circuit actually? Is my AD633 IC spoil or broken and give me this result? Please assist me =(
You can find the AD633 Analog Multiplier Datasheet at http://www.analog.com/static/imported-files/data_sheets/AD633.pdf