AC dimmer halogen lamp 220v

Thread Starter

ANOUXR

Joined Mar 1, 2020
6
Hi, i want to contol a 220v halogen lamp using microcontrolleur.i just started with the shematic on proteus.
The first circuit is for the zero crossing detector RB0/int.
The second is for firing the triac RB1.
And i want to display veff(lamp) on lcd.
What do u think about schematic, and any idea for programming (using micro c).
Thanks for your time.
 

Attachments

Alec_t

Joined Sep 17, 2013
14,280
Welcome to AAC!
If V1 is the mains supply you have one side of it directly grounded. That defeats the purpose of the opto-isolators.
As a side issue, doesn't Proteus have a way of re-positioning interconnection lines on the schematic? I find all those unnecessary kinks make reading the schematic difficult.
 

Thread Starter

ANOUXR

Joined Mar 1, 2020
6
Welcome to AAC!
If V1 is the mains supply you have one side of it directly grounded. That defeats the purpose of the opto-isolators.
As a side issue, doesn't Proteus have a way of re-positioning interconnection lines on the schematic? I find all those unnecessary kinks make reading the schematic difficult.
When i remove the ground the simulation fail, i found thats in proteus u need to add a ground to vsin.
I hope the schematic is clear now.
 

Attachments

Top