Scepter just had a promotion on their new Jbox (junction box).
http://www.ipexelectrical.com/Conte...etSegmentId=0&ProductId=69&LanguageCode=en-CA
email your address and they send a free sample.
Included in the shipment was a very nice multi-bit quick-change screwdriver.
Max.

 

Which one? Neither have a C of O marked on them, but both are very high quality.
Max.

 

What's so good about these compared to a normal J-Box? Just curious on why one would use one of these over a normal J-Box (metal or plastic)? It looks like you even have to drill your own knockouts. Only reasoh I could see myself using this is because it is aesthetically pleasing to ones eye for visible installs. Thoughts?

 

This is the published features.
I guess for surface applications, yes it is also ascetically pleasing.
Always the oportunist, I could'nt pass up a free-be when offered, the screwdriver was a bonus.
I will probabally use this one for a project box to house some portable shop project or other.
Max.


FEATURES & BENEFITS

Hand-close Fasteners
• Close by hand – tool assist to open
• 100% non-metallic – corrosion resistant material
• No loose hardware for easy installation

Integrated Gasket
• Injection molded gasket permanently fixed to the cover – no installation required
• Proprietary material provides NEMA 1, 2, 3R, 4, 4X, 6, 6P, 12, 13

Molded Mounting Feet
• Molded-in – no loose parts to assemble
• Located on corners out of the way of conduit connections
• Flush with the back of the box for close surface mounting
• Integrated design of mounting feet offers improved strength Smooth Flat Cover
• No ribs – offers a flat, smooth surface for mounting of devices or labels

Built-in Gridlines
• Easy reference for drilling knockouts
• Makes conduit alignment a snap

 

They're getting their money's worth out of you.

If I send you a free one of my products will you hype it up all over the forums for me?
(That's a joke. Before any moderators decide to bench us for spamming.)

 

If I send you a free one of my products will you hype it up all over the forums for me?

How do you know I haven't!
Max.

 

If I send you a free one of my products will you hype it up all over the forums for me?

I will, if it works well and solves a relevant problem!

 

What's so good about these compared to a normal J-Box? Just curious on why one would use one of these over a normal J-Box (metal or plastic)? It looks like you even have to drill your own knockouts. Only reasoh I could see myself using this is because it is aesthetically pleasing to ones eye for visible installs. Thoughts?

This looks like it could be used outside, whereas a "normal" one can't. I use boxes like this for projects, especially projects I use on my boat, in the cockpit.

 

That is wonderful surprise. Thanks.