Hi All,
I am designing a small single phase power distribution board for stage use.
A 63A CeeForm (IEC 60309) inlet will supply multiple 16A CeeForm outlets.
In series between the I/O will be a dual pole breaker > a RCB > then individual MCB's for the 16A outlets.
There will also be a panel meter displaying voltage and current.
On some proprietary distro's of this sort there are also 3 LED's displaying:
I'm researching a circuit that can achieve the above. Can anyone please point me in the right direction.
BTW: I'm UK based, so single phase supplies are 230V AC.
Many thanks.
I am designing a small single phase power distribution board for stage use.
A 63A CeeForm (IEC 60309) inlet will supply multiple 16A CeeForm outlets.
In series between the I/O will be a dual pole breaker > a RCB > then individual MCB's for the 16A outlets.
There will also be a panel meter displaying voltage and current.
On some proprietary distro's of this sort there are also 3 LED's displaying:
- Correct connection of L-N-E
- L-N Reversed
- Neutral Fault
- Earth Fault
I'm researching a circuit that can achieve the above. Can anyone please point me in the right direction.
BTW: I'm UK based, so single phase supplies are 230V AC.
Many thanks.