Hi I'm new to the forum. I've been working with various microcontrollers for the past 6 months (mainly atmel 89c51) and have done some basic projects such like LCDs and RTCs etc.
However I have been assigned a project that requires me to have one microcontroller program another by use of the tx rx termimals in port 3.
So for example microcontroller 1 will be programmed to put a program (e.g real time clock etc) in the memory of microcontroller 2. So when microcontroller 2 is disconnected from microcontroller 1 and turned on it will run the real time clock program.
I realize I may have worded this strangely and my experience is limited but any help given will be much appreciated.
Thanks Eric
However I have been assigned a project that requires me to have one microcontroller program another by use of the tx rx termimals in port 3.
So for example microcontroller 1 will be programmed to put a program (e.g real time clock etc) in the memory of microcontroller 2. So when microcontroller 2 is disconnected from microcontroller 1 and turned on it will run the real time clock program.
I realize I may have worded this strangely and my experience is limited but any help given will be much appreciated.
Thanks Eric