So it doesn't matter if the outputs are correct or not?Doesn't matter if it is active-hi or active low for this one.
Derive the functionality (equations or truth table or whatever) from the diagram and compare that to the function the circuit is supposed to implement.What would you suggest I do to verify?
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
Attiny1606 burning out when connected to a drv8251 | Digital Design | 3 | ||
K | Z80 address decoder | Digital Design | 5 | |
LED Ribbon-Spec VS Reality | General Electronics Chat | 8 | ||
SRAM COLUMN DECODER | Digital Design | 0 | ||
Why NEC IR remote control decoder does not work | Microcontrollers | 2 |