I'm looking for a way to allow higher voltage flow with a low voltage enabling input.
I have an application that runs on a 1s lipo battery (3.7v-4.2v). I need to allow around 6v through.
I tried 2n7000, 2n3904, RFP30n06lE, and IRLB3034, but the output is not enough. It seems the Gate/Base input needs at least 5v to be "fully" on.
I've also tried low power reed relay and they work, but the poles sticks quite often and I'm not entirely confident on it.
Is there some solid state switch mech out there that will allow me to input a low voltage and allow fully 5-10v through? Battery efficiency is not a concern for me at the moment.
Thanks.
I have an application that runs on a 1s lipo battery (3.7v-4.2v). I need to allow around 6v through.
I tried 2n7000, 2n3904, RFP30n06lE, and IRLB3034, but the output is not enough. It seems the Gate/Base input needs at least 5v to be "fully" on.
I've also tried low power reed relay and they work, but the poles sticks quite often and I'm not entirely confident on it.
Is there some solid state switch mech out there that will allow me to input a low voltage and allow fully 5-10v through? Battery efficiency is not a concern for me at the moment.
Thanks.