I have tried the bootloaders from microchip (cdc , HID) and all which is available for usb , the bootloader is burnt with programmer from kitsrus using their microburn software , and I am using demoboard from
http://www.nskelectronics.in/pic-usb-4550_brd.html ,
The normal Led blink codes are working but the ones related to usb are not ok . when i connect to pc it says usb device not recognized and in the driver tab , the VID and PID are 0000 , VUSB is connected with 440nF and I am using 20MHZ crystal.
kindly someone help me
http://www.nskelectronics.in/pic-usb-4550_brd.html ,
The normal Led blink codes are working but the ones related to usb are not ok . when i connect to pc it says usb device not recognized and in the driver tab , the VID and PID are 0000 , VUSB is connected with 440nF and I am using 20MHZ crystal.
kindly someone help me