I have a heavy duty car battery charger that I have been using as a 12 volt high current power supply. I'd like to convert it to output 12 volt AC. I expect that there are a few diodes I need to bypass. I opened up the device and recognized a heavy duty transformer. I see some other components but there are few markings for me to look up the components and confirm my assumptions. Do any of you in the know recognize the components in the attached pictures? Can you post what you see?
The first picture is off the transformer. You can see the positive red lead wire (normally what you connect to the positive terminal of the battery) toward the top of the picture. In the second picture you can see the negative lead black wire (normally what you connect to the negative terminal of the battery) connection at the top.
I hope you can help.
The first picture is off the transformer. You can see the positive red lead wire (normally what you connect to the positive terminal of the battery) toward the top of the picture. In the second picture you can see the negative lead black wire (normally what you connect to the negative terminal of the battery) connection at the top.
I hope you can help.
Attachments
-
946.6 KB Views: 54
-
809.6 KB Views: 50