Hello guys, new member here, i'm looking for a voltage regulator circuit, which i can use to mount an old 6V radio on a 12V car.
The requirements are:
Output voltage: 6.3V
Average current (from the radio's manual/schematic): 5.5A
Maximum current (based on the fuse used by the radio): 15A
I've researched a bit, but the circuits i found either couldn't keep with 15A loads, or when brought up were mentioned as "bad designs"
The requirements are:
Output voltage: 6.3V
Average current (from the radio's manual/schematic): 5.5A
Maximum current (based on the fuse used by the radio): 15A
I've researched a bit, but the circuits i found either couldn't keep with 15A loads, or when brought up were mentioned as "bad designs"